Active Six-Element Antenna Array for Robust GNSS Applications
The antenna array is composed of six active antenna elements and can be used for digital beamforming and null-steering in the entire GNSS frequency range.
An integrated calibration network enables to compensate any magnitude and phase drift between the channels.
The design is customizable and can be tailored to meet specific user requirements (e.g. 5 – 7 elements, planar or conformal reflector, etc.).
Technical Data
Specifications:
Parameter | Value |
Passband | 1160–1300 MHz and 1525–1610 MHz |
Polarization | RHCP |
Element spacing | 90 mm to 110 mm |
Passive zenith gain (single element) | in array: +1 to +4 dBic; stand-alone: +2.5 to +4.5 dBic |
Axial ratio (zenith) | in array: <5.5 dB; stand-alone: <3 dB |
LNA gain | 30 dB |
Power supply | 3.3 to 24 VDC, <50 mA per antenna element |
Connector type RF outputs | TNC female |
Impedance | 50 Ohms |
VSWR output connector | <2:1 |
Connector type calibration signal input | SMA |
Diameter / Height (w/o TNC) | 300 to 500 mm / 33 mm |
Weight | ca. 1.5 to 2.0 Kg |
Measured Radiation Pattern:
Technology licensed by Fraunhofer IIS
For further information, please send an e-mail to: info@teleorbit.eu